Connecticut Well Data › Capitol Planning Region › Plainville (06062)
Plainville, CT (06062): well depth, water level & drilling cost
✓ 72 DCP + USGS records · Capitol Planning Region
Pull every recorded well near a Plainville (06062) address — $49
How deep are wells in and around Plainville (06062), Connecticut?
The median drilled well depth in and around Plainville (06062) is 137 ft, based on 72 wells with recorded depths in the state DCP + USGS database. Half fall between 83 ft and 215 ft; 90% are shallower than 324 ft.
How much does it cost to drill a well in and around Plainville (06062)?
Applying published per-foot rates to the local median depth of 137 ft: drilling and casing alone typically runs $3,425–$8,905; a complete system including pump, pressure tank, and hookup typically runs $8,220–$13,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Plainville (06062)?
The median static water level is 28 ft below ground surface (middle half of wells: 21 ft–34 ft), from 2 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Capitol Planning Region.
Part of Capitol Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.