Connecticut Well Data › Lower Connecticut River Valley Planning Region › Killingworth (06419)
Killingworth, CT (06419): well depth, water level & drilling cost
✓ 72 DCP + USGS records · Lower Connecticut River Valley Planning Region
Pull every recorded well near a Killingworth (06419) address — $49
How deep are wells in Killingworth (06419), Connecticut?
The median drilled well depth in Killingworth (06419) is 315 ft, based on 72 wells with recorded depths in the state DCP + USGS database. Half fall between 179 ft and 493 ft; 90% are shallower than 530 ft.
How much does it cost to drill a well in Killingworth (06419)?
Applying published per-foot rates to the local median depth of 315 ft: drilling and casing alone typically runs $7,875–$20,475; a complete system including pump, pressure tank, and hookup typically runs $18,900–$31,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Killingworth (06419)?
The median static water level is 29 ft below ground surface (middle half of wells: 22 ft–40 ft), from 36 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lower Connecticut River Valley Planning Region.
Part of Lower Connecticut River Valley Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.