Connecticut Well Data › Lower Connecticut River Valley Planning Region › Durham (06422)
Durham, CT (06422): well depth, water level & drilling cost
✓ 194 DCP + USGS records · Lower Connecticut River Valley Planning Region
Pull every recorded well near a Durham (06422) address — $49
How deep are wells in and around Durham (06422), Connecticut?
The median drilled well depth in and around Durham (06422) is 190 ft, based on 194 wells with recorded depths in the state DCP + USGS database. Half fall between 115 ft and 273 ft; 90% are shallower than 389 ft.
How much does it cost to drill a well in and around Durham (06422)?
Applying published per-foot rates to the local median depth of 190 ft: drilling and casing alone typically runs $4,750–$12,350; a complete system including pump, pressure tank, and hookup typically runs $11,400–$19,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Durham (06422)?
The median static water level is 30 ft below ground surface (middle half of wells: 26 ft–40 ft), from 18 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lower Connecticut River Valley Planning Region.
Part of Lower Connecticut River Valley Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.