Connecticut Well Data › Lower Connecticut River Valley Planning Region › East Hampton (06424)
East Hampton, CT (06424): well depth, water level & drilling cost
✓ 134 DCP + USGS records · Lower Connecticut River Valley Planning Region
Pull every recorded well near a East Hampton (06424) address — $49
How deep are wells in East Hampton (06424), Connecticut?
The median drilled well depth in East Hampton (06424) is 300 ft, based on 134 wells with recorded depths in the state DCP + USGS database. Half fall between 200 ft and 400 ft; 90% are shallower than 521 ft.
How much does it cost to drill a well in East Hampton (06424)?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in East Hampton (06424)?
The median static water level is 20 ft below ground surface (middle half of wells: 15 ft–26 ft), from 100 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lower Connecticut River Valley Planning Region.
Part of Lower Connecticut River Valley Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.