Connecticut Well Data › Capitol Planning Region › Marlborough (06447)
Marlborough, CT (06447): well depth, water level & drilling cost
✓ 67 DCP + USGS records · Capitol Planning Region
Pull every recorded well near a Marlborough (06447) address — $49
How deep are wells in Marlborough (06447), Connecticut?
The median drilled well depth in Marlborough (06447) is 300 ft, based on 67 wells with recorded depths in the state DCP + USGS database. Half fall between 200 ft and 385 ft; 90% are shallower than 453 ft.
How much does it cost to drill a well in Marlborough (06447)?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Marlborough (06447)?
The median static water level is 20 ft below ground surface (middle half of wells: 20 ft–30 ft), from 40 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Capitol Planning Region.
Part of Capitol Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.