Connecticut Well Data › Lower Connecticut River Valley Planning Region › Middlefield (06455)
Middlefield, CT (06455): well depth, water level & drilling cost
✓ 54 DCP + USGS records · Lower Connecticut River Valley Planning Region
Pull every recorded well near a Middlefield (06455) address — $49
How deep are wells in and around Middlefield (06455), Connecticut?
The median drilled well depth in and around Middlefield (06455) is 146 ft, based on 54 wells with recorded depths in the state DCP + USGS database. Half fall between 96 ft and 235 ft; 90% are shallower than 386 ft.
How much does it cost to drill a well in and around Middlefield (06455)?
Applying published per-foot rates to the local median depth of 146 ft: drilling and casing alone typically runs $3,650–$9,490; a complete system including pump, pressure tank, and hookup typically runs $8,760–$14,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Middlefield (06455)?
The median static water level is 40 ft below ground surface (middle half of wells: 28 ft–68 ft), from 7 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lower Connecticut River Valley Planning Region.
Part of Lower Connecticut River Valley Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.