⟁ Connecticut Well Data field records · 2026 survey

Connecticut Well Data › Lower Connecticut River Valley Planning Region › Portland (06480)

Portland, CT (06480): well depth, water level & drilling cost

✓ 58 DCP + USGS records · Lower Connecticut River Valley Planning Region

248 ftmedian well depth
104 ft–389 fttypical depth range
30 ftmedian static water level
15 gpmmedian yield (33 tests)

Pull every recorded well near a Portland (06480) address — $49

How deep are wells in Portland (06480), Connecticut?

The median drilled well depth in Portland (06480) is 248 ft, based on 58 wells with recorded depths in the state DCP + USGS database. Half fall between 104 ft and 389 ft; 90% are shallower than 571 ft.

How much does it cost to drill a well in Portland (06480)?

Applying published per-foot rates to the local median depth of 248 ft: drilling and casing alone typically runs $6,200–$16,120; a complete system including pump, pressure tank, and hookup typically runs $14,880–$24,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Portland (06480)?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–50 ft), from 31 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 5 100–150 ft 9 150–200 ft 5 200–300 ft 6 300–400 ft 12 400–600 ft 10 600+ ft 3
Looking at a specific property in Portland (06480)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Portland (06480)

Free. Goes to licensed drillers working Lower Connecticut River Valley Planning Region.

Part of Lower Connecticut River Valley Planning Region well records.

Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.