Connecticut Well Data › Western Connecticut Planning Region › New Milford (06776)
New Milford, CT (06776): well depth, water level & drilling cost
✓ 78 DCP + USGS records · Western Connecticut Planning Region
Pull every recorded well near a New Milford (06776) address — $49
How deep are wells in New Milford (06776), Connecticut?
The median drilled well depth in New Milford (06776) is 250 ft, based on 78 wells with recorded depths in the state DCP + USGS database. Half fall between 93 ft and 320 ft; 90% are shallower than 410 ft.
How much does it cost to drill a well in New Milford (06776)?
Applying published per-foot rates to the local median depth of 250 ft: drilling and casing alone typically runs $6,250–$16,250; a complete system including pump, pressure tank, and hookup typically runs $15,000–$25,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in New Milford (06776)?
The median static water level is 20 ft below ground surface (middle half of wells: 20 ft–32 ft), from 46 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Western Connecticut Planning Region.
Part of Western Connecticut Planning Region well records.
Method: medians computed from DCP + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.